Ammonium Sulfate

Ammonium SulfateWhat Is Ammonium Sulfate?

The chemical compound ammonium sulfate is primarily used in fertilizers but is important in other industries as well. While it isn’t considered highly hazardous to humans, there are some important precautions to take if you’re using it.

Chemical Properties

Ammonium sulfate, also called diammonium sulfate or sulfuric acid diammonium salt, is a white crystalline solid with no smell. It tastes salty. The compound dissolves easily in water but will not dissolve in alcohol or acetone. It readily absorbs water, so if it’s exposed to moist air, it will “scab” on the damp surfaces. The chemical formula for ammonium sulfate is (NH₄)₂SO₄. When ammonium sulfate reacts with alkaline substances, it gives off ammonia gas. Finally, ammonium sulfate is a fertilizer that’s sometimes used in making homemade explosives.

Use in Fertilizers

Ammonium sulfate is used most commonly as an artificial fertilizer for alkaline soils. When introduced into damp soil, an ammonium ion is released. This creates a small amount of acid, which lowers the pH balance of the soil. It also contributes nitrogen, which aids in plant growth. It dissolves relatively slowly, which makes it cheaper than some other artificial fertilizers. Ammonium sulfate is also used as an herbicide because it will burn the leaves of plants and either kill them outright or at least weaken them for easy removal.

Other Uses

This compound is used in the production of printed circuit boards. It’s also in flame retardant materials because it lowers the combustion temperature and increases the production of residues or chars. Ammonium sulfate activates yeast, so it helps to get industrially produced bread to rise, and it’s also a general-purpose food additive. Finally, it plays an important role in developing vaccines during the purification process. The DTap vaccine, which protects children from diphtheria, tetanus, and whooping cough, uses ammonium sulfate for this purpose.

Sulfate AmmoniumHazards of Use

Ammonium sulfate is potentially dangerous to both people and the environment, so it requires care in its use. It can cause severe irritation and inflammation of the respiratory tract if inhaled. Eating or drinking ammonium sulfate will cause irritation in the gastrointestinal tract like nausea, vomiting, and diarrhea, although it isn’t toxic unless consumed in large quantities. Contact with the skin or eyes will cause irritation, redness, itching, and pain. It may also be a neurotoxin, meaning it can cause confusion and behavioral changes.

Avoiding Exposure

As with any potentially toxic chemical, it’s important to take safety precautions when using ammonium sulfate. Use ammonium sulfate only in a well-ventilated area or with a personal respirator. Wear chemical safety goggles and/or a full face safety shield if dusting or splashing solutions is possible. Also, wearing boots, gloves, and an apron or coveralls made of an impervious material like PVC will prevent skin contact. Any work area should be outfitted with an eyewash station and emergency shower in case of accidental exposure.

While ammonium sulfate is used as a fertilizer and therefore is readily available, it should not be used lightly. Taking basic precautions will allow you to get the benefits of using ammonium sulfate without putting yourself at risk.

Sulfate Ammonium FormulaFormula for Ammonium Sulfate

(NH4)2SO4

Properties for Ammonium Sulfate
Molar mass: 132.14 g/mol
Density: 1.769 g/cm3 (20 °C)
Melting point: 235 to 280 °C (455 to 536 °F; 508 to 553 K) (decomposes)

Metal Suppliers

Featured Industries

Aluminum Power Pages

Aluminum Tubing & Piping

Aluminum Tubing & Piping

Aluminum piping and tubing is silvery-white, soft, and ductile. The metal belongs to the boron group. Aluminum is the third most abundant element present on earth. Aluminum has low density. When exposed...

Aluminum Coil

Aluminum Coil

The term "aluminum coil" describes aluminum that has been flattened into sheets where their width is significantly higher than their thickness and then "coiled" into a roll. Stacks of individual aluminum sheets are difficult to...

Types of Aluminum

Types of Aluminum

Aluminum is the most abundant metal on the Earth’s crust, but it rarely exists as an elemental form. Aluminum and its alloys are valued because of their low density and high strength-to-weight ratio, durability, and corrosion resistance...

Aluminum 1100

Series 1100 Aluminum 4mm Rectangular Bar

Aluminum 1100 is the softest of the aluminum alloys, which makes it easy to shape and form into a wide range of products for industrial and home use. It can be cold and hot worked but is frequently shaped by spinning, stamping, forging, and drawing...

Extruded Aluminium

Extruded Aluminium

Extruded aluminum is a continuous piece of aluminum that usually has a constant profile or cross-section throughout its length. It is made by forcing a block of aluminum, called a billet, through a die opening which is smaller than the original cross-sectional area of the billet...

Aluminum Trim

Aluminum Trim

Aluminum trim is an aluminum product that is produced by extrusion to create long, narrow, pliable, and adaptive pieces of aluminum that can be used for architectural decorative applications and accents, indoor and outdoor lighting, and engineering design...

Copper

Copper

Copper is a ductile, malleable, and reddish-gold metal with the capacity to effectively conduct heat and electricity. Brass and bronze, two commonly used alloys, are created when copper is combined with...

Titanium Metal

Applications of Titanium Metal

Titanium metal, with the symbol Ti, is the ninth most abundant element on the earth’s crust. It does not occur in large deposits, yet small amounts of titanium are found in almost every rock. Titanium is a shiny gray metal with...

Stainless Steel Fabrication

Stainless Steel Fabrication

Stainless steel can be fabricated using any of the traditional forming and shaping methods. Austenitic stainless steel can be rolled, spun, deep drawn, cold forged, hot forged, or stippled using force and stress...

Metal Suppliers

Featured Industries